- Autonics
- ABB
- Bosch Rexroth
- Heater and Thermocouple
- Anti Condensation Heater
- Band Heater
- Cartridge Heater
- Cast Aluminium Heater
- Ceramic Band
- Ceramic Infrared
- Circulation Heater
- Coil Element Heater
- Drum Heater
- Finned Heater
- Flange Immersion Heater
- Halogen Heater
- Heating Tape
- Hot Runner Coil Heater
- Infrapara Heater
- Metal Immersion Heater
- Plate or Strip Heater
- Quartz Heater
- Sauna Heater
- Screw Immersion Heater
- Teflon Heater
- Thermocouple & RTD (PT-100)
- Tubular Heater
- Mitsubishi
- OMRON
- Schneider
- Siemens
- WEG
KCS SALES AND MARKETING SDN BHD
9, Jalan Rishah Permai 1, Taman Rishah Permai, 30100 Ipoh, Perak, Malaysia.
+605-282 3209
+6012-525 6248
+6012-525 6248
sPMC-2HSN/2HSP Series
| Previous | 1 / 2 | Next |
2-Axis Interpolation/Standard Type Programmable Motion Controllers (PMC-2HSN to be discontinued)
The PMC-2HSP/2HSN series programmable motion controllers feature high-speed independent 2-axis control with processing speed up to 4 Mpps. The PMC-2HSP model supports linear and circular interpolation control. 200 steps of operation programming is possible with 17 control commands (PMC-2HSN: 13 commands) and 4 operation modes are available (scan, continuous, index, program). Multiple control of up to 32-axes (16 units) is possible with RS485 communication (Modbus RTU)
Main features
The PMC-2HSP/2HSN series programmable motion controllers feature high-speed independent 2-axis control with processing speed up to 4 Mpps. The PMC-2HSP model supports linear and circular interpolation control. 200 steps of operation programming is possible with 17 control commands (PMC-2HSN: 13 commands) and 4 operation modes are available (scan, continuous, index, program). Multiple control of up to 32-axes (16 units) is possible with RS485 communication (Modbus RTU)
Main features
¡ù The PMC-2HSN series will be discontinued on November 11, 2021.
- High-speed independent 2-axis control with processing speed up to 4 Mpps
- Supports linear and circular interpolation control (PMC-2HSP)
- 17 control commands and up to 200 steps of operation programming (13 commands for PMC-2HSN series, excluding linear and circular interpolation commands)
- Supports various control interfaces (USB, RS232C, RS485, Parallel I/O)
- Multiple control of up to 32-axes (16 units) with RS485 communication (Modbus RTU)
- 4 operation modes : jog, continuous, index, program
- Symmetrical/asymmetrical trapezoid or S-shaped acceleration/deceleration control